prof. claudio ferone

Patents

1.       Brevetto Nazionale N. RM2008A000155 del 20 marzo 2008 dal titolo Materiali compositi metallo-ceramici nanostrutturati e procedimento per la loro realizzazione, autori M. Pansini, C. Ferone, S. Esposito, A. Marocco.

Volumes

1.       L. Santoro, R. Cioffi, C. Ferone, Applicazioni strutturali. (pp. 149-169). In: C Leonelli e M Romagnoli. Geopolimeri: Polimeri inorganici chimicamente attivati. Lulu.com (2011). ISBN: 978-1-4477-1913-7 (citare II Ediz.)
​

Scientific publications on International Journals 
 
1.       A. Colantuono, S. Dal Vecchio, C. Ferone, G. Mascolo, M. Pansini, Ignition of ammonia on various zeolitic substrates, Thermochimica Acta 303 (1997) 17-21.

2.       A. Colantuono, S. Dal Vecchio, G. Mascolo, C. Ferone, O. Marino, A. Vitale, Measuring Capillary Absorption Coefficient of Porous Materials, The American Ceramic Society Bulletin, 76 (1997) 10, pp. 67-70.

3.       G. Dell’Agli, C. Ferone, G. Mascolo, M. Pansini, Dilatometry of Na-, K-, Ca- and NH4- Clinoptilolite, Thermochimica Acta, 336 (1999), 105-110.

4.       G. Dell’Agli, C. Ferone, G. Mascolo, M. Pansini, Crystallization of monoclinic zirconia from metastable phases, Solid State Ionics, 2000, 127, 223-230.

5.       G. Dell’Agli, C. Ferone, M.C. Mascolo, M. Pansini, Thermal Transformations of Ba exchanged A and X zeolites into monoclinic celsian, Solid State Ionics, 2000, 127, 309-317.

6.       C. Ferone, G. Dell’Agli, M.C. Mascolo, M. Pansini, New insight into the thermal transformation of barium exchanged zeolite A to celsian, Chem. Mater., 2002, 14, 797-803.

7.       A. Aronne, S. Esposito, C. Ferone, M. Pansini, P. Pernice, FTIR study of the thermal transformation of barium exchanged zeolite A to celsian, J. Mater. Chem., 2002, 12(10), pp. 3039 – 3045.

8.       N. J. Clayden, S. Esposito, C. Ferone, and M. Pansini, 29Si and 27Al NMR study of the thermal transformation of barium exchanged zeolite A to celsian, J. Mater. Chem., 2003, 13 (7), 1681-1685.

9.       M.C. Mascolo, G. Dell'Agli, C. Ferone, M. Pansini, G. Mascolo, Thermal crystallization of ion-exchanged zeolite A, Journal of European Ceramic Society, Issue 23, vol.10, pp1705-1713 (2003).

10.   S. Esposito, C. Ferone, M. Pansini, L. Bonaccorsi, E. Proverbio, A Comparative Study of the Thermal Transformations of Ba- Exchanged Zeolites A, X and LSX, Journal of European Ceramic Society, 2004, Issue 24, vol. 9, pp. 2689-2697.

11.   C. Ferone, S. Esposito, M. Pansini, Thermally induced structural and microstructural evolution of barium exchanged zeolite A to celsian, Studies in Surface Science and Catalysis, Oxide Based Materials, 2005, vol. 155, pp. 249-260

12.   D. Caputo, B. de Gennaro, P. Aprea, C. Ferone, M. Pansini, C. Colella, Data processing of cation exchange equilibria in zeolites: a modified approach, Studies in Surface Science and Catalysis, Oxide Based Materials, 2005, vol. 155, pp. 129-140.

13.   C. Ferone, S. Esposito, G. Dell'Agli, M. Pansini, Role of Li in the Low Temperature Synthesis of Monoclinic Celsian from (Ba, Li)-Exchanged Zeolite A Precursor, Solid State Sciences 7 (2005) p. 1406-1414. 

14.   N. J. Clayden, S. Esposito, C. Ferone, M. Pansini, Substitution clustering in a non-stoichiometric celsian synthesized by the thermal transformation of barium exchanged zeolite-X, J. Sol. St. Chem., 179 (2006) 1957-1964.

15.   C. Ferone, S. Esposito, M. Pansini, Microwave assisted hydrothermal conversion of Ba-exchanged zeolite A into metastable paracelsian, Microporous and mesoporous materials, 96 (2006) pp. 9-13

16.   F. Andreola, M. Romagnoli, C. Siligardi, T. Manfredini, C. Ferone, M. Pansini, Densification and crystallization of Ba-exchanged zeolite A powders, Ceramics International, 34 (2008) pp. 543-549

17.   C. Ferone, A. Marocco, M. Pansini, G. Dell’Agli, S. Esposito, Effect of residual Na on the low temperature synthesis of monoclinic celsian from zeolite Ba-A, Studies in Surface Science and Catalysis, A. Gedeon, P. Massiani and F. Babonneau Eds., Vol. 174, Elsevier Amsterdam, 2008, 197-200

18.   B. Liguori, C. Ferone, S. Anaclerio, C.Colella, Monoclinic Sr-celsian by thermal treatment of Sr-exchanged zeolite A, LTA-type framework, Solid State Ionics 179 (2008), pp. 2358-2364

19.   S. Ronchetti, E. A. Turcato, A. Delmastro, S. Esposito, C. Ferone, M. Pansini, B. Onida, D. Mazza, Study of the thermal transformations of Co- and Fe-exchanged zeolites A and X by in situ XRD under reducing atmosphere, Materials Research Bulletin, 45 (2010), 744 - 750

20.   C. Ferone, B. Liguori, A. Marocco, S. Anaclerio, M. Pansini, C. Colella, Monoclinic (Ba, Sr)-celsian by thermal treatment of (Ba, Sr)-exchanged zeolite A. Microporous and Mesoporous Materials 134 (2010) 65–71

21.   S. Andini, R. Cioffi, F. Colangelo, C. Ferone, F. Montagnaro, L. Santoro, Characterization of geopolymer materials containing MSWI fly ash and coal fly ash, Advances in Science and Technology Vol. 69 (2010) pp 123-128 (2010) Trans Tech Publications, Switzerland

22.   C. Ferone, F. Colangelo, R. Cioffi, F. Montagnaro, L. Santoro, Mechanical performances of weathered coal fly ash based geopolymer bricks, Procedia Engineering 21 (2011) 745-752

23.   C. Ferone, F. Colangelo, R. Cioffi, F. Montagnaro, L. Santoro, Use of Reservoir Clay Sediments as Raw Materials for Geopolymer Binders, Advances in Applied Ceramics, 2013, 112(4), 184 – 189. doi 10.1179/1743676112Y.0000000064

24.   C. Ferone, G. Roviello, F. Colangelo, R. Cioffi, O. Tarallo, Novel Hybrid Organic-Geopolymer materials, Applied Clay Science 73 (2013) 42–50, DOI: 10.1016/j.clay.2012.11.001

25.   C. Menna, D. Asprone, C. Ferone, F. Colangelo, A. Balsamo, A. Prota, R. Cioffi, G. Manfredi, Use of geopolymers for composite external reinforcement of RC members, Composites: Part B 45 (2013) 1667-1676 http://dx.doi.org/10.1016/j.compositesb.2012.09.019

26.   C. Ferone, F. Colangelo, G. Roviello, R. Cioffi, C. Menna, D. Asprone, A. Balsamo, A. Prota, G. Manfredi, Application-oriented chemical optimization of a metakaolin based geopolymer. Materials 2013, 6, 1920-1939; doi:10.3390/ma6051920.

27.   L. Ricciotti, F. Borbone, A. Carella, R. Centore, A. Roviello, M. Barra, G. Roviello, C. Ferone, C. Minarini, P. Morvillo, Synthesis of highly regioregular poly[3-(4-alkoxyphenyl)-thiophene]s by oxidative catalysis using copper complexes, Journal of Polymer Science DOI: 10.1002/pola.26849

28.   G. Roviello, L. Ricciotti, C. Ferone, F. Colangelo, R. Cioffi, O. Tarallo, Synthesis and characterization of novel epoxy geopolymer hybrid composites Materials 2013, 6, 3943-3962; doi:10.3390/ma6093943.

29.   C. Ferone, F. Colangelo, F. Messina, L. Santoro, R. Cioffi, Recycling of Pre-Washed Municipal Solid Waste Incinerator Fly Ash in the Manufacturing of Low Temperature Setting Geopolymer Materials Materials 2013, 6, 3420-3437; doi:10.3390/ma6083420.

30.   F. Colangelo, G. Roviello, L. Ricciotti, C. Ferone, R. Cioffi, Preparation and Characterization of New Geopolymer-Epoxy Resin Hybrid Mortars, Materials 2013, 6, 2989-3006; doi:10.3390/ma6072989

31.   G. Roviello, A. Tuzi, C. Capacchione, S. Milione, C. Ferone, 2-[2,2-Bis-(4,4-dimethyl-4,5-dihydro-oxazol-2-yl)-propyl]-pyridine-dichloro-Iron(II), Acta Cryst. (2013). E69, m433–m434

32.   L. Ricciotti, G. Roviello, O. Tarallo, F. Borbone, C. Ferone, F. Colangelo, M. Catauro, R. Cioffi, Synthesis and characterizations of melamine based epoxy resins International Journal of Molecular Sciences (Int. J. Mol. Sci.) 2013, 14(9), 18200-18214; doi:10.3390/ijms140918200

33.   M. Migliaccio, G. Ferrara, A. Gifuni, A. Sorrentino, F. Colangelo, C. Ferone, R. Cioffi, F. Messina, Shielding effectiveness tests of low cost civil engineering materials in a reverberating chamber, Progress in Electromagnetic Research B, Vol. 54, page 227-243, 2013

34.   F. Colangelo, G. De Luca, C. Ferone, A. Mauro, Experimental and numerical analysis of thermal and hygrometric characteristics of building structures employing recycled plastic aggregates and geopolymer concrete, Energies 2013, 6, 6077-6101; doi:10.3390/en6116077

35.   C. Ferone, F. Colangelo, F. Messina, F. Iucolano, B. Liguori, R. Cioffi, Coal combustion wastes reuse in low energy artificial aggregates manufacturing, Materials 2013, 6, 5000-5015; doi:10.3390/ma6115000

36.   M. Catauro, F. Papale, G. Roviello, C. Ferone, F. Bollino, M. Trifuoggi, C. Aurilio, Synthesis of SiO2 and CaO rich calcium silicate systems via sol-gel process: bioactivity, biocompatibility and drug delivery tests. 2014. J Biomed Mater Res Part A 2014:102A:3087–3092

37.   A.Carella, F. Borbone, G. Roviello, U. Caruso, C. Ferone, L. Ricciotti, B. Pirozzi, P. Persico, A. G. Schieroni, A. Roviello, Rigid chain ribbon-like metallopolymers (2014) J. Polym. Sci. A Polym. Chem., 52: 2412–2421. doi: 10.1002/pola.27255

38.   B. Molino, A. De Vincenzo, C. Ferone, F. Messina, F. Colangelo, R. Cioffi, Recycling of Clay Sediments for Geopolymer Binder Production. A New Perspective for Reservoir Management in the Framework of Italian Legislation: The Occhito Reservoir Case Study, Materials 2014, 7, 5603-5616; doi:10.3390/ma7085603

39.   C. Ferone, F. Colangelo, D. Frattini, G. Roviello, R. Cioffi, R. di Maggio, Finite Element Method Modeling of Sensible Heat Thermal Energy Storage with Innovative Concretes and Comparative Analysis with Literature Benchmarks. Energies 2014, 7, 5291-5316, doi:10.3390/en7085291

40. C. Ferone, B. Liguori, I. Capasso, F. Colangelo, R. Cioffi, E. Cappelletto, R. Di Maggio, Thermally treated clay sediments as geopolymer source material, Applied Clay Science, 107, 2015, Pages 195–204, doi:10.1016/j.clay.2015.01.027

41. G. Roviello, L. Ricciotti, C. Ferone, F. Colangelo, O. Tarallo, Fire resistant melamine based organic-geopolymer hybrid composites, Cement & Concrete Composites, 59, 2015, Pages 89–99, doi:10.1016/j.cemconcomp.2015.03.007

42. Messina, F., Ferone, C., Colangelo, F., Cioffi R., Low temperature alkaline activation of weathered fly ash: influence of mineral admixtures on early age performance. Construction and Building Materials, 2015, 86, 169-177. http://dx.doi.org/10.1016/j.conbuildmat.2015.02.069

43 N. J. Clayden, G. Accardo, A. Piccolo, P. Mazzei, P. Pernice, A. Vergara, C. Ferone, A. Aronne, Phosphorus stably bonded to silica gel matrix through niobium bridges. Journal of Materials Chemistry A 06/2015; in press. DOI:10.1039/C5TA03267A

44. Dell'Agli G., Spiridigliozzi L., Marocco A., Accardo G., Ferone C., Cioffi R., Effect of the mineralizer solution in the hydrothermal synthesis of gadolinium-doped (10% mol Gd) ceria nanopowders.  Journal of Applied Biomaterials & Functional Materials . 2016, Vol. 14 Issue 2, pe189-e196. 8p.
 
45. G. Roviello, L. Ricciotti, O. Tarallo, C. Ferone, F. Colangelo, V. Roviello and R. Cioffi. Innovative Fly Ash Geopolymer-Epoxy Composites: Preparation, Microstructure and Mechanical Properties. Materials 2016, 9(6), 461; doi:10.3390/ma9060461.

46. A. Strini, G. Roviello, L. Ricciotti, C. Ferone, F. Messina, L. Schiavi, D. Corsaro and R.Cioffi, TiO2-Based Photocatalytic Geopolymers for Nitric Oxide Degradation. Materials 2016, 9(7), 513; doi:10.3390/ma9070513

47. F. Messina a, C. Ferone , A. Molino, G. Roviello, F. Colangelo, B. Molino, R. Cioffi. Synergistic recycling of calcined clayey sediments and water potabilization sludge as geopolymer precursors: Upscaling from binders to precast paving cement-free bricks. Construction and Building Materials journal Accepted 10 December 2016. 


International Conferences

1.       G. Dell’Agli, C. Ferone, G. Mascolo, Thermal behaviour of protonated titanates with different H/Ti ratio, Proc. J. Med. C.A.T., Palma de Mallorca 24-28 june 1997, p. 57.

2.       A. Colantuono, S. Dal Vecchio, C. Ferone, G. Mascolo, M. Pansini, Use of dilatometry in the characterization of zeolitic tuffs, Proceedings of Zeolite ’97, 5th International Conference on Occurence, Properties and Utilization of Natural Zeolites, C. Colella ed., De Frede, Napoli, 1997, pp. 111-113.

3.       A. Colantuono, S. Dal Vecchio, C. Ferone, G. Mascolo, M. Pansini, Dilatometric characterization of natural phillipsite and chabazite bearing materials, Natural Zeolites for the Third Millenium, C. Colella and F.A. Mumpton eds, pp. 299-304, De Frede Editore, Napoli, Italy, 2000.

4.       C. Ferone, M. Pansini, M. C. Mascolo, A. Vitale, Preliminary study on the set up of mortars displaying biocidal activity, Proceedings of the 9th International Congress on Deterioration and Conservation of the Stone, Venice, june 19-24, 2000, Edited by Vasco Fassina, pp. 371 – 378, Elsevier ed.

5.       G. Dell’Agli, C. Ferone, G. Mascolo, O. Marino, A. Vitale, Durability of tufaceous stones treated with protection and consolidation products, Proceedings of the 9th International Congress on Deterioration and Conservation of the Stone, Venice, june 19-24, 2000, Edited by Vasco Fassina, pp. 379 – 385, Elsevier ed.

6.       C. Ferone, S. Esposito, M Pansini, Synthesis of Celsian Based Ceramics from Ba-Exchanged Zeolite A Precursors, X International Conference on the Physics of Non-Crystalline Solids, Parma (Italy), 13-17 Luglio 2003, O 82.

7.       C. Ferone, M. Pansini, F. Andreola, L. Barbieri, C. Siligardi and T. Manfredini, Non Conventional Synthesis Of Monoclinic Celsian From Ba-Exchanged Zeolite A: Study Of The Effect Of Residual Na And Forming Pressure, 11th International Ceramics Congress – Advances in Science and Technology – Trans Tech Publications Ltd (Switzerland) - Vol. 45 (2006) pp. 963 – 968.

8.       C. Ferone, B. Liguori, A. Marocco, S. Anaclerio, M. Pansini, C. Colella, Thermal conversion of (Ba, Sr)-exchanged zeolite A in BaAl2Si2O8-SrAl2Si2O8 solid solutions, J.G.Heinrich and C. Aneziris eds., Proc. 10th ECerS Conf., Göller Verlag, Baden-Baden, 2007, 1946-1952, ISBN: 3-87264-022-4

9.       C. Ferone, F. Colangelo, L. Russo, R. Cioffi, F. Montagnaro, L. Santoro, Use of Reservoir Clay Sediments as Raw Materials for Geopolymer Binders, Proceedings of 31st Cement and Concrete Science Conference, Novel Developments and Innovation in Cementitious Materials, 12-13 September 2011, ISBN: 978-0-9570152-0-3

10.   R. Cioffi, C. Ferone, F. Messina, F. Colangelo, Artificial aggregate production from power plant solid wastes by means of a granulation process, Proc. ASH 2012, Stockholm, Sweden, January 25-27 2012.

11.   C. Ferone, G. Accardo, G. Dell’Agli, R. Cioffi, Sol-gel synthesis of Gadolinium doped ceria (Gd–CeO2) for intermediate temperature SOFC electrolite, Proceedings of EFC2013, Fifth European Fuel Cell Technology & Applications Conference - Piero Lunghi Conference, December 11-13, 2013, Rome, Italy, 391-392, ENEA, ISBN 978-88-8286-297-8

12.   G. Accardo, C. Ferone, A. Aronne, P. Pernice and R. Cioffi, Synthesis of Nb2O5-P2O5-SiO2 materials for proton exchanges membranes for fuel cells (PEMFC) applications, Proceedings of EFC2013, Fifth European Fuel Cell Technology & Applications Conference - Piero Lunghi Conference, December 11-13, 2013, Rome, Italy, 393-394, ENEA, ISBN 978-88-8286-297-8

13.   R. Cioffi, F. Colangelo, C. Ferone, F. Messina, Cold bonding pelletization in manufacturing of articificial aggregates, Proceedings of R. N. Raikar Memorial Internatonal Conference and Dr. Suru Shah Symposium on Advances in Science and Technology of Concrete, Organized by India Chapter of American Concrete Institute, December 20-21, 2013, Mumbay, India, 219-230, ICACI, ISBN 81-86876-14-6.

14.   F. Messina, C. Ferone, F. Colangelo and R. Cioffi, Influence of Blast Furnace Slag and Silica Fume on Early Age Engineering Performance of Alkali Activated Fly Ash after Short-Term Low Temperature Curing. Proc. 34th Cement and Concrete Science Conference, 14-17 September 2014, University of Sheffield, Ed.s Susan A. Bernal & John L. Provis, 279 – 282

15.   F. Colangelo, C. Ferone, F. Messina R. Cioffi, MSWI Fly Ash Cementation by Means of Cold-Bonding Pelletization. Proc. 34th Cement and Concrete Science Conference, 14-17 September 2014, University of Sheffield, Ed.s Susan A. Bernal & John L. Provis, 511 – 514

16.   S. Campopiano, A. Iadicicco, F. Messina, C. Ferone, R. Cioffi, Measurement of temperature and early age shrinkage of alkali activated metakaolin using fiber Bragg grating sensors. 2014 IEEE Workshop on Environmental, Energy, and Structural Monitoring Systems Proceedings, September 17-18, 2014, Naples, Italy, IEEE, IEEE Catalog Number: CFP1466H-CDR, ISBN: 978-1-4799-4989-2, 138 – 142, DOI: 10.1109/EESMS.2014.6923280.

17.  D. Frattini, G. Falcucci, M. Minutillo, C. Ferone, R. Cioffi, E. Jannelli, Influence of configuration and components on the performances of air-cathode single chamber MFCs fed by solid organic waste, Proc. 2nd Euro-Mediterranean Hydrogen Technologies Conference, At Taormina – Italy, 9 – 12 December 2014, 123 - 124.

18.  C. Menna, D. Asprone, D. Forni, G. Roviello, L. Ricciotti, C. Ferone, A. Bozza, A. Prota, E. Cadoni, Tensile behaviour of geopolymer-based materials under medium and high strain rates, 11th International DYMAT Conference, September 7th-11th, 2015, Lugano – Switzerland

19.  S. Campopiano, A. Iadicicco, F. Messina, C. Ferone, R. Cioffi, Fiber Bragg grating sensors as a tool to evaluate the influence of filler on shrinkage of geopolymer matrices, Proc. SPIE 9506, Optical Sensors 2015, 95061J (May 5, 2015); http://dx.doi.org/10.1117/12.2182343

20.  A. Petrillo, R. Cioffi, C. Ferone, F. Colangelo, C. Borrelli, Eco-sustainable geopolymer concrete blocks production process, Agriculture and Agricultural Science Procedia  (2015)

 
National Conferences

1.       C. Ferone, O. Marino, G. Mascolo, A. Vitale, Problematiche connesse alla protezione e conservazione del tufo nel costruito, Atti 3° Congresso Nazionale AIMAT, omaggio scientifico a Riccardo Sersale a cura di Carmine Colella, Napoli 25 - 27 settembre 1996, 1040.

2.       G. Dell'Agli, C. Ferone, O. Marino, G. Mascolo, Cristallizzazione idrotermale di TiO2 in soluzioni di LiOH, Atti 3° Congresso Nazionale AIMAT, omaggio scientifico a Riccardo Sersale a cura di Carmine Colella, Napoli 25 - 27 settembre 1996, 18.

3.       A. Colantuono, S. Dal Vecchio, G. Mascolo, C. Ferone, O. Marino, A. Vitale, Prova NORMAL 11/85 per la misura del coefficiente di assorbimento di acqua per capillarità (C.A.) di materiali porosi e confronto con prove in continuo, Atti del Convegno Internazionale Umidità ascendente: risultati sperimentali, esperienze, mercato a cura di M. Stella, Bari, 9 - 10 ottobre 1996, p. 369-378.

4.       G. Dell'Agli, C. Ferone, O. Marino, G. Mascolo, A. Vitale, Effetto del tempo di stagionatura di malte composte (UNI) calce/cemento sul blocco dell'umidità ascendente nelle murature, Atti del Convegno Internazionale Umidità ascendente: risultati sperimentali, esperienze, mercato a cura di M. Stella, Bari, 9 - 10 ottobre 1996, p. 363-368.

5.       A. Colantuono, S. Dal Vecchio, G. Dell’Agli, C. Ferone, O. Marino, G. Mascolo, Ritenzione di memoria della forma di TiO2 prodotto da titanati alcalini protonati, Atti I Convegno Nazionale sulla Scienza e Tecnologia dei Materiali, Lerici (La Spezia), 1997, c18.

6.       C. Ferone, O. Marino, G. Mascolo, A. Vitale, Il sito archeologico di Velia (IV-V sec. A.C.): stato di conservazione e composizione attuale di alcune malte di allettamento; Atti Giornate di Studio Materiali e Tecniche per il Restauro, a cura di G. Mascolo, Cassino 3 - 4 ottobre 1997, pp. 11-19, Idea Stampa Editore.

7.       C. Ferone, O. Marino, G. Mascolo, A. Vitale, Trattamenti conservativi del tufo giallo napoletano con prodotti a base silanica, Atti IV Congresso Nazionale AIMAT, a cura di U. Sanna, Cagliari 8-11 giugno 1998, pp. 753-759, PTM Editrice – Mogoro.

8.       C. Ferone, M.C. Mascolo, M. Pansini, A. Vitale, Studio preliminare sulla realizzazione di malte ad attività biocida, Atti II Convegno Materiali e Tecniche per il Restauro, a cura di G. Mascolo, Cassino 1 e 2 ottobre 1999, pp 81-90, Idea Stampa Editore.

9.       G. Dell’Agli, C. Ferone, M.C. Mascolo, M. Pansini, Ottenimento di materiali ceramici da precursori zeolitici, Atti del II Convegno sulla Scienza e Tecnologia dei Materiali, Acireale (CT) 14-16 ottobre 1999, 2P editrice, Pontassieve (FI), 1999, C65.

10.   G. Dell’Agli, C. Ferone, G. Mascolo, M. Pansini, Produzione di polveri nanometriche di zirconia stabilizzata e non per trattamento idrotermale a bassa temperatura, Atti del II Convegno sulla Scienza e Tecnologia dei Materiali, Acireale (CT) 14-16 ottobre 1999, 2P editrice, Pontassieve (FI), 1999, C67.

11.   G. Dell’Agli, C. Ferone, M. C. Mascolo, M. Pansini, Aspetti cinetici della cristallizzazione della celsiana da precursore zeolitico, Atti 5° Congresso Nazionale AIMAT 2000, a cura J.M. Kenny, Spoleto 17-21 luglio 2000, pp. 647 - 651.

12.   O. Marino, G. Mascolo, A. Vitale, C. Ferone, Il degrado di un paramento murario in tufo a faccia vista, Atti 5° Congresso Nazionale AIMAT 2000, a cura J.M. Kenny, Spoleto 17-21 luglio 2000, pp. 479 - 482.

13.   G. Mascolo, G. Dell’Agli, C. Ferone, M. Pansini, A. Colantuono, A. Di Mambro, POttimizzazione di processo per la sintesi di precursori ceramici nanometrici a base di zirconia stabilizzata e di miscele zirconia-allumina per via idrotermale rogetto Finalizzato Materiali Speciali per Tecnologie Avanzate – Relazioni scientifiche – Sottoprogetto 1 – Sottoprogetto 2, C.N.R. ed., novembre 2001, pp. 39 – 42.

14.   G. Dell’Agli, S. Esposito, C. Ferone, M.C. Mascolo, M. Pansini, Trasformazione termica di precursori zeolitici in celsiana, Atti del 6° Congresso AIMAT 2002 (su cd rom), abstract p. 72.

15.   M.C. Mascolo, G. Dell’Agli, C. Ferone, M. Pansini, G. Mascolo, Cristallizzazione termica di fasi a base di B-eucriptite da differenti precursori zeolitici, Atti del 6° Congresso AIMAT 2002 (su cd rom), abstract p. 82.

16.   G. Dell'Agli, S.Esposito, C.Ferone, M.C. Mascolo, M Pansini, Effect of Li Addition on the Synthesis of Monoclinic Celsian from Ba Exchanged Zeolite A Precursors, IV Convegno Nazionale sulla Scienza e Tecnologia dei Materiali, Ischia Porto (NA), 29 giugno – 2 luglio 2003, C24.

17.   G. Dell’Agli, S. Esposito, C. Ferone, R. Palmaccio, M. Pansini, Role of Li in the thermal transformation of zeolite precursors to monoclinic celsian, Atti VII congresso AIMAT, Ancona, 29 giugno – 2luglio 2004, su cd.

18.   C. Ferone, S. Esposito, M. Pansini, Thermally induced structural and microstructural evolution of barium exchanged zeolite A to celsian, 3rd International Workshop on Oxide based Materials new sources, novel phases, new applications, Como, Società del Casino, 13-16 settembre 2004, pp. 49-50.

19.   D. Caputo, B. de Gennaro, P. Aprea, C. Ferone, M. Pansini, C. Colella, Data processing of cation exchange equilibria in zeolites: a modified approach, 3rd International Workshop on Oxide based Materials new sources, novel phases, new applications, Como, Società del Casino, 13-16 settembre 2004, pp. 23-24.

20.   C. Ferone, A. Vitale, M. Colella, A. Di Nuzzo, Il sito archeologico di Velia: stato di conservazione e composizione attuale di alcune malte di allettamento; Atti del Convegno: Diagnostica per la Tutela dei Materiali e del Costruito, 4 dicembre 2003, sito reale di S. Leucio, a cura di A. Catalano e G. Frunzio, Luciano Editore, pp. 65 – 73.

21.   N. Gargiulo, D. Caputo, C. Ferone, C. Colella, Synthesis of MCM-41 mesoporous silica by microwave-induced heating and its sorption characterization, Proc.7th Convegno Naz. Scienza e Tec. Zeoliti, G. Giordano Ed., Centro Edit. e librario, Università della Calabria, Rende (CS) 2005, p. 147-150 

22.   A. Colantuono, S. Esposito, C. Ferone and M. Pansini, Sintesi idrotermale mediante riscaldamento a microonde della fase metastabile paracelsiana, atti Convegno AIMAT’06, su CD.

23.   E.A. Turcato, S. Ronchetti, B. Onida, D. Mazza, P. Rivolo, S. Esposito, C. Ferone, Characterization of zeolites exchanged with heavy metals as precursors of metal-ceramic composites, National Conference on Science and Technology of Zeolites, Book of Abstracts, L. Marchese, S. Coluccia, E. Garrone (eds.) Aracne, Turin,(2007) 1P8, pp. 67 - 68

24.   C. Ferone, B. Liguori, A. Marocco, S. Anaclerio, M. Pansini, C. Colella, Preparazione di soluzioni solide(Ba,Sr)Al2Si2O8 per conversione termica di zeolite A [LTA] pre-scambiata al Bario e allo stronzio, Atti del 9° Convegno Nazionale AIMAT, Piano di Sorrento, 29 giugno – 2 luglio 2008, Ed. Ziino, ISBN 978-88-900948-6-6, pp. 345 - 348

25.   C. Ferone, R. Cioffi, F. Colangelo, L. Russo, L. Santoro, F. Montagnaro, Produzione di aggregati artificiali ecocompatibili per geopolimerizzazione di scarti di ceneri volanti di carbone, proceedingsl convegno Rifiuti, ricerche industriali legate alla gestione e valorizzazione , 14° Fiera Internazionale del Recupero di Materia ed Energia e dello Sviluppo Sostenibile, ECOMONDO, Rimini Fiera 3, 6 novembre 2010, a cura di L. Morselli, Maggioli Editore, pp. 271-276

26.   S. Andini, R. Cioffi, F. Colangelo, C. Ferone, F. Montagnaro, L. Santoro, Caratterizzazione di materiali geopolimerici contenenti ceneri da inceneritore di rifiuti solidi urbani e ceneri di carbone, Proceedings 10° Convegno Nazionale AIMAT, Capo Vaticano (VV) 5 – 8 settembre 2010, Centro Editoriale e Librario Università della Calabria, ISBN 978-88-7458-114-6, pp. 17-20

27.   C. Ferone, L. Russo, F. Colangelo, R. Cioffi, Utilizzo di sedimenti argillosi lacuali non contaminati per la produzione di manufatti geopolimerici, Proceedings Seminario L’interrimento dei serbatoi artificiali. I sedimenti:un problema una risorsa, Ferrara, 18-19 ottobre 2010, CSEI Catania, ISSN 2038-5854 pp. 147-158.

28.   C. Ferone, L. Russo, F. Colangelo, R. Cioffi, Use of reservoir clay sediments for the production of geopolymeric building blocks, Proceedings of VIII INSTM Conference, Catania, 26-29th June 2011, P33, Samperi Editore, Messina, ISBN: 978-88-86038-99-7

29.   C. Ferone, B. Liguori, Sintering of Sr-celsian obtained by thermal treatment of Sr-exchanged LTA zeolite, Proceedings of the 10th Congress of Italian Zeolite Association, 14-17 September 2011, pp. 129-132, De Frede Editore, Napoli, ISBN: 978-88-89976-33-3

30.   C. Ferone, G. Roviello, F. Ruffo, Processi catalitici innovativi per l’ossidazione ecocompatibile di residui organici provenienti da reflui industriali, Atti del 3° Incontri Mediterranei di Igiene Industriale. Microinquinanti negli ambienti di lavoro e di vita: Monitoraggio Ambientale, Monitoraggio Biologico e Valutazione del Rischio, 6-7 ottobre 2011, pp. 208-211, ISBN: 978-88-86293-18-1

31.   L. Russo, C. Ferone, L. De Stefano, R. Cioffi, Metodologie per il monitoraggio e la caratterizzazione della frazione carboniosa del particolato atmosferico proveniente da centrali termoelettriche a carbone, Atti del 3° Incontri Mediterranei di Igiene Industriale. Microinquinanti negli ambienti di lavoro e di vita: Monitoraggio Ambientale, Monitoraggio Biologico e Valutazione del Rischio, 6-7 ottobre 2011, pp. 259-265, ISBN: 978-88-86293-18-1

32.   R. Cioffi, F. Colangelo, G. di Nunzio, C. Ferone, F. Messina, B. Molino, Trattamento e recupero di sedimenti lacuali per la produzione di materiali da costruzione eco-sostenibili, Atti del seminario L’interrimento dei serbatoi artificiali – La gestione delle acque e dei sedimenti, VII edizione, Catania, 1-2 dicembre 2011, Quaderni Autorità di Bacino della Basilicata, n. 8, aprile 2013, 129 – 139 ISBN 978-88-903073-6-2

33.   C. Ferone, G. Roviello, O. Tarallo, R. Cioffi (2012). Novel Hybrid Organic-geopolymer materials. Proceedings VIII Convegno della Associazione Italiana Chimica per l'Ingegneria. Aci Castello, Catania.

34.   C. Ferone, L. Russo, F. Colangelo, R. Cioffi, B. Molino, Produzione di leganti geopolimerici a base di sedimenti argillosi, 2012, Atti del XI Convegno AIMAT, Gaeta, Latina.

35.   R. Cioffi, F. Colangelo, C. Ferone, L. Ricciotti, G. Roviello, O. Tarallo, Materiali ibridi organico-geopolimerici, Atti del 12° Convegno Nazionale AIMAT, Pubblicato da AIMAT (AIMAT Ass. Italiana Ingegneria dei Materiali), 2014, Italia, 28 – 33, ISBN 9788894040203.

36.   C. Ferone, F. Colangelo, R. Cioffi, I. Capasso, D. Caputo, B. Liguori, Impiego di ceneri volanti per la produzione di malte geopolimeriche per applicazioni in sistemi di accumulo termico ad alta temperatura, Atti del 12° Convegno Nazionale AIMAT, Pubblicato da AIMAT (AIMAT Ass. Italiana Ingegneria dei Materiali), 2014, Italia, 121 – 125, ISBN 9788894040203.

37.       C. Ferone, O. Marino, G. Mascolo, A. Vitale, Umidità ascendente nelle murature. Come ridurre il fenomeno con malte tradizionali, L'Edilizia, '96, 7/8, 60.

38.      A. Simeoni, M. Elefante, F. Colangelo, C. Ferone, S. D’Alessio, R. Cioffi, Valorizzazione del processo di trattamento dei rifiuti da C&D attraverso la marcatura CE dei prodotti e recupero dei fanghi di lavaggio, In Concreto, 10/14, 1-8, ISSN 2308-0833

39. A. Petrillo, R. Cioffi, C. Ferone, C. Borrelli, Ecosustainable Geopolymer Concrete Blocks Production Process. Florence "Sustainability of Well-Being International Forum". 2015 Food and sustainability and not just food, FlorenceSWIF2015.

prof. giuseppina roviello

Patents

A)    U.S. Pat. Appl. Publ. 2009, 21pp. US 2009322212. Authors: Giovanna Salzillo, Antonio Roviello, Giuseppina Roviello, Giuseppe Russo. 
‘Synthesis of new organic material for polymeric light emitting diode’

B)    Italian Patent NA2011A000030. Authors: Antonio Roviello, Laura Ricciotti, Fabio Borbone, Giuseppina Roviello, Antonio Carella. 'Politiofeni 3-sostituiti di regioregolarita' molto elevata da catalizzatori a base di rame(II)'

C)    Italian Patent NA2011A000037. Authors: Antonio Roviello, Fabio Borbone, Giuseppina Roviello. 'Film colesterici fotostabili per la riflessione e/o trasmissione selettiva della luce e loro uso'

D)    Italian Patent NA2014A000027. Authors: Giuseppina Roviello, Costantino Menna, Oreste Tarallo, Laura Ricciotti, Claudio Ferone, Domenico Asprone, Francesco Colangelo, Raffaele Cioffi, Antonio Roviello, Andrea Prota. ‘Materiali ibridi geopolimero-silicone per applicazioni ad alte temperature: metodo di preparazione e materiali così ottenuti’

 Contributions in volumes

 A)    Del Litto R, Roviello G, Ruffo F (2007). Benzyl-4,6-O-isopropylidene-a-D-glucopyranoside,2-deossi-2-[[(2-hydroxy-3,5-di-tertbutylphenyl)-methylene]imine] as a ligand for vanadium-catalyzed asymmetric oxidation of sulfides. In: J. Whittall. Catalysts for Fine Chemical Synthesis Vol 5: Regio- and Stereo-controlled Oxidations and Reductions. vol. 5, p. 293-296, CHICHESTER:WILEY, ISBN: 978-0-470-09022-0

 B)    Panunzi B, Roviello G (2005). Synthesis and characterization of a new polymer for optoelectronic sensors. In: Annals of the Faculty of Agriculture of the University of Naples Federico II. vol. 2, p. 141-154

 C)    Santoro L., Tarallo O., Cioffi R., Ferone C., Ricciotti L., Roviello G. (2013), Applicazioni Strutturali. In: Geopolimeri Polimeri Inorganici Chimicamente Attivati, ISBN 1447719131, 9781447719137.G. Dell’Agli, L. Spiridigliozzi, A. Marocco, G. Accardo, C. Ferone, R. Cioffi “Gadolinia-doped (10 % mol Gd) ceria nanopowders synthesized by hydrothermal treatment” 2014 Solid State Sciences–in press.

​Scientific publications on International Journals ​

1.      A. Panunzi, G. Roviello, F. Ruffo, ‘Fine-Tuning the Basicity of Metal Complexes: Reversible Oxidative Addition of Se-Se Bonds to Pt(II) Precursors’. Organometallics 2002, 21, 3503-3505.

2.      V. G. Albano, M. Monari, I. Orabona, A. Panunzi, G. Roviello, F. Ruffo, ‘Synthesis and Characterisation of Trigonal Bipyramidal Olefin Platinum(II) Complexes with Chalcogenide Ligands in Axial Position. The X-ray Molecular Structures of [Pt(SMe)2(dmphen)(diphenylfumarate)], Its Cationic Dipositive Derivative [Pt(SMe2)2(dmphen)(diphenylfumarate)][BF4]2 and Free Diphenylfumarate’. Organometallics 2003, 22, 1223-1230.

 3.      V. G. Albano, M. Monari, A. Panunzi, G. Roviello, F. Ruffo,‘Absolute configuration, coordination and stereochemical influence of 1,3,5,7-tetramethyl-2,6,9-trioxo-bicyclo[3,3,1]nona-3,7-diene in Rh(I) and cationic Pd(II) complexes’. Journal of Organometallic Chemistry 2003, 679, 93-100.

 4.      A. Panunzi, G. Roviello, F. Ruffo, ‘Oxidative addition of Se-X bonds and reductive elimination of Se-C bonds in platinum compounds containing hydrocarbyl ligands’. Inorganic Chemistry Communication 2003, 6, 1282-1286.

5.      V. G. Albano, V. De Felice, M. Monari, G. Roviello, F. Ruffo, ‘Oxidative addition of phenylselenenyl halides to platinum(0) complexes: characterization and reactivity of the products [PtX(SePh)(N,N-chelate)(olefin)] (X= Cl, Br, I)’. European Journal of Inorganic Chemistry 2005, 2, 416-422.

 6.      R. Centore, G. Roviello, A. Tuzi, ‘Two geometrical isomers of the five-coordinate Platinum(II) complex [PtBr(SePh)(2,9-dimethyl-1,10-phenanthroline)(dimethyl maleate)]’. Inorganica Chimica Acta 2005, 358(6), 2112-2116.

7.      V. De Felice, A.  De Renzi, N. Fraldi, G. Roviello, A.Tuzi, ‘C-C coupling of aryl groups and allyl derivatives on Pt(II)-phenanthroline fragments: crystal and molecular structure of the tbp [(h1, h2-2-allyl-5-methyl-phenyl)iodo(1,10-phenanthroline)platinum(II)] complex containing the N-N ligand in axial-equatorial coordination mode’. Journal of Organometallic Chemistry 2005, 690(8), 2035-2043.

 8.      M. E. Cucciolito, R. Del Litto, G. Roviello, F.Ruffo, ‘O,N,O' tridentate ligands derived from carbohydrates in the V(IV)-promoted asymmetric oxidation of thioanisole’. Journal of  Molecular Catalysis A: Chemical 2005, 236, 176-181.

 9.      C. Borriello, R. Centore, G. Roviello, ‘Hydrolysis of Pd(II)-bound acetonitrile: molecular and crystal structure of the syn isomer of the dinuclear (1,10-phenanthroline)palladium(II) complex bridged with acetamido groups and of its acetonitrile solvate’. Inorganic Chemistry Communication 2005, 8, 755-758.

10.  V. De Felice, N. Fraldi, A. Panunzi, G. Roviello, F. Ruffo, ‘Bis-chelating ligands based on bipyridine or bis-isoquinoline moieties with controlled rotation around the C-C bond’. Inorganic Chemistry Communication 2005, 8, 1049-1052.

11.  V. Busico, R. Cipullo, R. Pellecchia, S. Ronca, G. Roviello, G. Talarico, ‘Design of stereoselective Ziegler-Natta propene polymerization catalysts’. Proceedings of the National Academy of Sciences of the United States of America 2006, 103(42), 15321-15326.

12.  C. Battocchio, F. D'Acapito, I. Fratoddi, A. La Groia, G. Polzonetti, G. Roviello, M. V. Russo, ‘Platinum(II) dialkynyl bridged binuclear complex and related multinuclear oligomer: Comparison of EXAFS and x-ray crystal structure studies’. Chemical Physics 2006, 328(1-3), 269-274.

13.  G. Roviello, F. Ruffo, A. Tuzi, ‘[(1,2,5,6-h )-Cycloocta-1,5-diene]bis(4-methoxyphenyl)platinum(II)’. Acta Crystallographica, Section E: Structure Reports Online 2006, E62(6), m1416-m1418.

 14.  V. De Felice, N. Fraldi, G. Roviello, F. Ruffo, A. Tuzi, ‘Coordination modes of 1,2,3,4-tetrahydro-1,4-diphenyl-1,4-benzodiphosphinine (bedip) to Pt and Pd metal ions: Synthesis and structural characterization of mono- and bi-nuclear complexes’. Journal of Organometallic Chemistry 2007, 692(23), 5211-5220.

 15.  A. Roviello, A. Buono, A. Carella, G. Roviello, A.Cassinese, M. Barra, M. Biasucci, ‘Regioregular poly[3-(4-alkoxyphenyl)thiophene]s’. Journal of Polymer Science, Part A: Polymer Chemistry 2007, 45(9), 1758-1770. 

 16.  F. Borbone, A. Carella, U. Caruso, G. Roviello, A. Tuzi, P. Dardano, S. Lettieri, P. Maddalena, A. Barsella, ‘Large Second Order NLO Activity in Poly(4-vinylpyridine) Grafted with Pd(II) and Cu(II) Chromophoric Complexes with Tridentate Bent Ligands Containing Heterocycles’. European Journal of Inorganic Chemistry 2008, 11, 1846-1853.

17.  M. E. Cucciolito, A. de Renzi, G. Roviello, F. Ruffo, ‘Reactivity of cis-{PtII(Ar)(alkyne)} fragments (Ar = aryl): a domino-formation of indenes’ Organometallics 2008, 27(6), 1351-1353.

18.  A. Roviello, F. Borbone, A. Carella, R. Diana, G. Roviello, B. Panunzi, A. Ambrosio, P. Maddalena, ‘High quantum yield photoluminiscence of new polyamides containing oligo-PPV amino derivatives and related oligomers’. Journal of Polymer Science: Part A: Polymer Chemistry 2009, 47, 2677-2689.

 19.  U. Caruso, B. Panunzi, G. N. Roviello, G. Roviello, M. Tingoli, A. Tuzi, ‘Synthesis, structure and reactivity of amino-benzodifurane derivatives’. Comptes Rendus Chimie 2009, 12, 622-634.

20.  R. Vitaliano, I. Fratoddi, I. Venditti, G.Roviello, C. Battocchio, G. Polzonetti, M. V. Russo, ‘Self-Assembled Monolayers Based on Pd-Containing Organometallic Thiols: Preparation and Structural Characterization’. Journal of  Physical Chemistry A 2009, 113, 14730-14740.

21.  M. E. Cucciolito, R. Del Litto, F. P. Fanizzi, D. Migoni, G. Roviello, F. Ruffo, ‘Hydrophilic ligands derived from glucose: synthesis, characterization and in vitro cytotoxic activity on cancer cells of Pt(II) complexes’. Inorganica Chimica Acta 2010, 363(4), 741-747.

22.  M. E. Cucciolito, V. de Felice, G. Rovello, F. Ruffo, ‘Three-Coordinate [Pt(N,N '-chelate)(eta(2)-olefin)] Complexes: Synthesis, Properties and Reactions with Electrophiles’, European Journal of Inorganic Chemistry 2011, 4, 457-469.

23.  A. De Roma, H.j. Yang, S. Milione, C. Capacchione, G. Roviello, A. Grassi, ‘Atom transfer radical polymerization of methylmethacrylate mediated by a naphtyl-nickel(II) phosphane complex.’ Inorganic Chemistry Communications 2011, 14(4), 542-544. 

24. G. Li; M. Lamberti; M. Mazzeo; D. Pappalardo; G. Roviello, C. Pellecchia, ‘Anilidopyridyl-Pyrrolide and Anilidopyridyl-Indolide Group 3 Metal Complexes: Highly Active Initiators for the Ring-Opening Polymerization of rac-Lactide’. Organometallics 2012, 31(3), 1180-1188. DOI:10.1021/om201251g

25. I. D'Auria; M. Lamberti; M. Mazzeo;  S. Milione; G. Roviello; C. Pellecchia, 'Coordination Chemistry and Reactivity of Zinc Complexes Supported by a Phosphido Pincer Ligand’. Chemistry--A European Journal 2012, 18(8), 2349-2360. DOI:10.1002/chem.201102414

 26.  G. N. Roviello,, G. Roviello, D. Musumeci,  E. M. Bucci and C. Pedone, ‘Dakin-West reaction on 1-thyminyl acetic acid for the synthesis of 1,3-bis(1-thyminyl)-2-propanone, a heteroaromatic compound with nucleopeptide-binding properties.’ Amino Acids DOI 10.1007/s00726-012-1237-7, published online: 15 February 2012

27.  A. Carella, F. Borbone, A. Roviello, G. Roviello, A. Tuzi, A. Kravinsky, R. Shikler, Giovanni Cantele, Domenico Ninno, ‘Benzodifuroxazinones, a new class of heteroacene molecules for possible applications in organic electronics: Synthesis, electronic properties and crystal structure’. Dyes and Pigments 2012 DOI: 10.1016/j.dyepig.2012.03.033

28. G Li,  ; M. Lamberti; G. Roviello; C. Pellecchia, ‘New Titanium and Hafnium Complexes Bearing [-NNN-] Pyrrolylpyridylamido Ligands as Olefin Polymerization Catalysts’. Organometallics 2012, 31(19), 6772-6778

29. C. Ferone; G. Roviello; F. Colangelo; R. Cioffi; O. Tarallo,  ‘Novel hybrid organic-geopolymer materials’. Applied Clay Science 2013, 73, 42-50

30.  C. Ferone, F. Colangelo, Giuseppina Roviello, Domenico Asprone, Costantino Menna, Alberto Balsamo, Andrea Prota, Raffaele Cioffi,Gaetano Manfredi, ‘Application-Oriented Chemical Optimization of a Metakaolin Based Geopolymer’. Materials 2013, 6, 1920-1939

31.  L. Ricciotti, F. Borbone, A. Carella, R. Centore, A. Roviello, M. Barra, G. Roviello, C. Ferone, C. Minarini, C. Morvillo. Synthesis of highly regioregular poly[3-(4-alkoxyphenyl)-thiophene]s by oxidative catalysis using copper complexes. J. Polym Sci. Polym. Chem. 2013, DOI: 10.1002/pola.26849.

32.  G. Roviello, A. Tuzi, C. Capacchione, S. Milione, C. Ferone, {2-[2,2-Bis(4,4-dimethyl-4,5-dihydro-1,3-oxazol-2-yl- κN)propyl]pyridine}dichloridoiron(II). Acta Cryst. 2013, E69, m433–m434

33.  F. Colangelo , G. Roviello , L. Ricciotti , C. Ferone , R. Cioffi. On the preparation and characterization of new geopolymer-epoxy resin hybrid mortars.  Materials 2013, 6, 2989-3006; doi:10.3390/ma6072989. 

34.  L. Ricciotti , G. Roviello , O. Tarallo, F. Borbone, C. Ferone, F. Colangelo , M. Catauro and R. Cioffi. Synthesis and Characterizations of Melamine-Based Epoxy Resins. Int. J. Mol. Sci. 2013, 14, 18200-18214; doi:10.3390/ijms140918200

35.   G. Roviello, L. Ricciotti, C. Ferone, F. Colangelo, R. Cioffi and O. Tarallo. Synthesis and Characterization of Novel Epoxy Geopolymer Hybrid Composites Materials 2013, 6, 3943-3962; doi:10.3390/ma6093943.

36.  G. Roviello , A. Tuzi , F. Borbone , A. Carella , G.N. Roviello. Dipentyl 2,6-diaminobenzo[1,2-b :4,5-b ]difuran-3,7-dicarboxylate. Acta Cryst. 2013 E69, o1526-o1527.

37.  F. Borbone, G. Roviello, L. Ricciotti, B. Panunzi, M. Catauro, A. Roviello, ‘Synthesis and thermotropic behaviour of cholesteric mixtures containing metallomesogen Cu(II), Ni(II), Pd(II) and VO(II) complexes’. Inorganic Chemistry Communications 2013, 38, 135–138

38.  M. Catauro, F. Papale, G. Roviello, C. Ferone, F. Bollino, M. Trifuoggi and C. Aurilio, ‘Synthesis of SiO2 and CaO rich calcium silicate systems via sol-gel process: Bioactivity, biocompatibility, and drug delivery tests’. Journal of Biomedical Materials Research Part A, 2013, DOI:10.1002/jbm.a.34978.

39.  A. Carella, F. Borbone, G. Roviello, U. Caruso, C. Ferone, L. Ricciotti, B. Pirozzi, P. Persico, A. Giacometti Schieroni, A. Roviello. ‘Rigid Chain Ribbon-like Metallopolymers’. Journal of Polymer Science, Part A: Polymer Chemistry 2014, 52, 2412-2421.

40.  G. N. Roviello, G. Roviello, D. Musumeci, D. Capasso, S. Di Gaetano, M. Costanzo and C. Pedone. ‘Synthesis and supramolecular assembly of 1,3-bis(10-uracilyl)-2-propanone’. RSC Adv., 2014, 4, 28691 DOI: 10.1039/c4ra03713h

41.  C. Ferone, F. Colangelo, D. Frattini, G. Roviello, R. Cioffi ,R. di Maggio. ‘Finite Element Method Modeling of Sensible Heat Thermal Energy Storage with Innovative Concretes and Comparative Analysis with Literature Benchmarks’. 
Energies 2014, 7, 5291-5316; doi:10.3390/en7085291
 

42. G. Roviello,  L. Ricciotti, C. Ferone, F. Colangelo, O. Tarallo. Fire resistant melamine based organic-geopolymer hybrid composites. Cement and Concrete Composites
Volume 59, May 2015, Pages 89–99

43. G. Roviello, C. Menna, O. Tarallo, L. Ricciotti, C. Ferone, F. Colangelo, D. Asprone, R. di Maggio, E. Cappelletto, A. Prota, R. Cioffi. Preparation, structure and properties of hybrid materials based on geopolymers and polysiloxanes
Materials & Design Volume 87, 15 December 2015, Pages 82–94

 
44. F. Borbone, N. Grizzuti, R. Pasquino, L. Ricciotti, A. Roviello & G. Roviello. Induced cholesteric solutions of highly soluble bis-salicylaldiminate Cu(II) metallomesogens and their rheological behaviour. Journal Liquid Crystals Volume 42, 2015 - Issue 7.
 
45. G. Roviello , L. Ricciotti , O. Tarallo , C. Ferone , F.rancesco Colangelo , V. Roviello  and R. Cioffi.  Innovative Fly Ash Geopolymer-Epoxy Composites: Preparation, Microstructure and Mechanical Properties. Materials 2016, 9(6), 461;
doi:10.3390/ma9060461.

46. C. Menna, D. Asprone, D. Forni, G. Roviello, L. Ricciotti, C. Ferone, A. Bozza, A. Prota and E. Cadoni. Tensile behaviour of geopolymer-based materials under medium and high strain rates. EPJ Web of Conferences 94, 01034 (2015).

47. A. Strini , G. Roviello, L. Ricciotti, C. Ferone , F. Messina, L. Schiavi, D. Corsaro  and R. Cioffi. TiO2-Based Photocatalytic Geopolymers for Nitric Oxide Degradation. Materials 2016, 9(7), 513; doi:10.3390/ma9070513.

48. F. Messina a, C. Ferone , A. Molino, G. Roviello, F. Colangelo, B. Molino, R. Cioffi. Synergistic recycling of calcined clayey sediments and water potabilization sludge as geopolymer precursors: Upscaling from binders to precast paving cement-free bricks. Construction and Building Materials journal Accepted 2017. 

49. R. Esposito, L. Calvanese, M.E. Cucciolito, G. D’Auria, L. Falcigno, V. Fiorini, G. D’Auria, L. Falcigno, V. Fiorini, P. Pezzella, G. Roviello, S. Stagni, G. Talarico, F. Ruffo. Oxidative Coupling of Imino, Amide Platinum (II) Complexes Yields Highly Conjugated Blue Dimers. Organometallics, 2017

Prof. Francesco Colangelo

Scientific publications on International Journal

1.  Andini, S.; Cioffi, R.; Colangelo, F.; Grieco, T.; Montagnaro, F.; Santoro, L. Coal fly ash as raw materials for the manufacture of geopolymer-based products. Waste Management 2008, 28 (2), 416-423. 

2.  Andini, S.; Cioffi, R.; Colangelo, F.; Ferone, C.; Montagnaro, F.; Santoro, L. Characterization of geopolymer materials containing MSWI fly ash and coal fly ash. Advances in Science and Technology 2010, 69, 123-128. 


 3. Ferone, C.; Colangelo, F.; Cioffi, R.; Montagnaro, F.; Santoro, L. Mechanical performances of weathered coal fly ash based geopolymer bricks. Procedia Engineering 2011, 21, 745-752. 
 
4.  Colangelo, F.; Cioffi, R.; Lavorgna, M.; Verdolotti, L.; De Stefano, L. Treatment and recycling of asbestos-cement containing waste. Journal of Hazardous Materials 2011, 195, 391-397. 

5.  Cioffi, R.; Colangelo F.; Montagnaro, F.; Santoro, L. Manufacture of artificial aggregate using  MSWI bottom ash. Waste Management 2011, 31 (2), 281-288. 

6.  Colangelo, F.; Cioffi, R.; Montagnaro, F.; Santoro, L. Soluble salt removal from MSWI fly ash and its stabilization for safer disposal and recovery as road basement material. Waste management 2012, 32 (6), 1179-1185.  

7. Iucolano, F.; Liguori, B.; Caputo, D.; Colangelo, F.; Cioffi, R.Recycled plastic aggregate in mortars composition: Effects on physical and mechanical properties. Materials and Design 2013, 52, 916-922. 

8.    Colangelo F.; Roviello, G.; Ricciotti, L.; Ferone, C.; Cioffi, R. Preparation and characterization of new geopolymer-epoxy resin hybrid mortars. Materials 2013, 6 (7), 2989-3006. 
 
9. Colangelo F.; Cioffi, R. Use of cement kiln dust, blast furnace slug and marble sludge in the manufacture of sustainable artificial aggregates by means of cold bonding pelletization. Materials 2013, 6 (8), 3139-3159. 

10. Ferone, C.; Colangelo F.; Roviello, G.; Asprone, D.; Menna, C.; Balsamo, A.; Prota, A.; Cioffi, R.; Manfredi, G. Application-oriented chemical optimization of a metakaolin based geopolymer. Materials 2013, 6 (5), 1920-1939. 
 
11. Andini, S.; Montagnaro, F.; Santoro, L.; Accardo, G.; Cioffi, R.; Colangelo F. Mechanochemical processing of blast furnace slag for its reuse as adsorbent. Chemical Engineering Transaction 2013, 32, 2299-2304. 

12. Ferone, C.; Colangelo, F.; Cioffi, R.; Montagnaro, F.; Santoro, L. Use of reservoir clay sediments as raw materials for geopolymer binders. Advances in Applied Ceramics 2013, 112 (4), 184-189. 
 
13.  Menna, C.; Asprone, D.; Ferone, C.; Colangelo, F.; Balsamo, A.; Prota, A.; Cioffi, R.; Manfredi, G. Use of geopolymers for composite external reinforcements of RC members. Composites Part B: Engineering 2013, 45 (1), 1667-1676. 

14.  Ferone, C.; Roviello, G.; Colangelo F.; Cioffi, R.; Tarallo, O. Novel hybrid organic-geopoymer materials. Applied Clay Science 2013, 73 (1), 42-50. 

15.  Roviello, G.; Ricciotti, L.; Ferone, C.; Colangelo F.; Cioffi, R.; Tarallo, O. Synthesis and characterization of novel epoxy geopolymer hybrid composites. Materials 2013, 6 (9), 3943-3962.
 
16.  Andini, S.; Cioffi, R.; Colangelo, F.; Montagnaro, F.; Santoro, L. Effect of mechanochemical processing on adsorptive properties of blast furnace slag. Journal of Environmental Engineering 2013, doi:10.1061/(ASCE)EE.1943-7870.0000768. 
 
17.  Ferone, C.; Colangelo F.; Messina, F.; Santoro, L.; Cioffi, R. Recycling of pre-washed municipal solid waste incinerator fly ash in the manufacturing of low temperature setting geopolymer. Materials 2013, 6 (8), 3420-3437.
 
18.  Russo, L.; Colangelo F.; Cioffi, R.; Rea, I.; De Stefano, L. A mechanochemical approach to porous silicon nanoparticles fabrication. Materials 2011, 4 (6), 1023-1033.
 
19.   Colangelo. F.; De Luca, G.; Ferone, C.; Mauro, A. Experimental and numerical analysis of thermal     and hygrometric characteristics of building structures employing recycled plastic aggregates and  geopolymer concrete. Energies 2013, 6, in press.

20.  Colangelo F., Messina F.,  Cioffi R.  Recycling of MSWI fly ash by means of cementitious double step cold bonding pelletization: Technological assessment for the production of lightweight artificial aggregates. Journal of Hazardous Materials Volume 299, 15 December 2015, Pages 181–191. 

21. Colangelo F., Ferone C., Messina F., Cioffi R. Low temperature alkalineactivation of weathered fly ash: Influence of mineral admixtures on early age performance. Construction and Building Materials Volume 86, 1 July 2015, Pages 169-177.

22.  Petrillo A.,  Cioffi R., Ferone C., Colangelo F.,  Borrelli C. Eco-sustainable Geopolymer Concrete Blocks Production Process. Agriculture and Agricultural Science ProcediaVolume 8, 2016, Pages 408-418.
 
23.  Farina I., Fabbrocino F., Colangelo F., Feo L., Fraternali F. Surface roughness effects on the reinforcement of cement mortars through 3D printed metallic fibers. Composites Part B: Engineering Volume 99, 15 August 2016, Pages 305–311.
 
24. G. Roviello , L. Ricciotti , O. Tarallo, C. Ferone, F. Colangelo , V. Roviello  and R. Cioffi. Innovative Fly Ash Geopolymer-Epoxy Composites: Preparation, Microstructure and Mechanical Properties. Materials 2016, 9(6), 461; doi:10.3390/ma9060461
​
25. Petrillo A.,  Cioffi R., Ferone C., Colangelo F.,  Borrelli C. Eco-sustainable Geopolymer Concrete Blocks Production Process. Agriculture and Agricultural Science Procedia Volume 8, 2016, Pages 408-418.
 
26.  Farina I., Fabbrocino F., Colangelo F., Feo L., Fraternali F. Surface roughness effects on the reinforcement of cement mortars through 3D printed metallic fibers. Composites Part B: Engineering Volume 99, 15 August 2016, Pages 305–311. 

27. Colangelo F., Cioffi R., Liguori B.,  Iucolano F. Recycled polyolefins waste as aggregates for lightweight concrete. Composites Part B: Engineering Volume 106, 1 December 2016, Pages 234–241. 

28. Petrillo A., Cioffi R.,  De Felice F., Colangelo F.,  Borrelli C. An environmental evaluation: A comparison between geopolymer and OPC concrete paving blocks manufacturing process in Italy. Published online 25 July 2016 in Wiley Online Library (wileyonlinelibrary.com). DOI 10.1002/ep.12421.
 
29. F. Colangelo, R. Cioffi, B. Liguori, F. Iucolano.  Recycled polyolefins waste as aggregates for lightweight concrete. Composites Part B: Engineering Volume 106, 1 December 2016, Pages 234–241.
 
30. F. Messina , C. Ferone, A. Molino , G. Roviello , F. Colangelo , B. Molino, R. Cioffi. Synergistic recycling of calcined clayey sediments and water potabilization sludge as geopolymer precursors: Upscaling from binders to precast paving cement-free bricks. Construction and Building Materials Accepted in 10 December 2016